Security level of the asbestos at work

For people who work in places where there is exposure to asbestos, some guidelines have been given some setup.

These guidelines are designed to help employees and employers to take a job that involves a safe and not exposed to asbestos resulting in their contracting dangerous diseases such as mesothelioma.

If an employee or contractor discovers that the material consists of or consists of asbestos, then they can complain to the authorities and must not engage in any activity that could lead to release of asbestos into the air.

These results can be reported to the management of the Department that will report to the chief surveyor of the Department of Environment. They will then carry out the following questionnaire must:

Verify or the air for the presence of asbestos particles

O sampling of material that might have the presence of asbestos

Predisposition or for the safety of the employee in order to avoid any type of exposure

or encapsulation

Elimination or by a licensed contractor

If the presence of asbestos has been shown, the following action was taken by the company:

Or Encapsulate with a sealant. This process will ensure that asbestos is not disturbed in the future

or remove it completely from the premise and then replace it with an alternative.

Government control limits for levels of exposure to asbestos has been established and a person is not protected, should not be exposed to asbestos fibers in excess of the limit. All employees who work in the presence of approved products containing asbestos must be fully aware of safety rules and guidelines for the use of asbestos.

They need to meet all installation requirements in the standards. Should not work on any product of asbestos specific unless the type of asbestos used is known and of a "safe system of work" has been established.

The most significant aspect ensures that the way in which asbestos is used in a plant is the level of asbestos dust released into the atmosphere during the course of the work done is to produce a product of asbestos or of related work.

The Government has established maximum levels for the various types of fibers exposed in the air.

These levels are as follows:

- Type of asbestos crocidolite or amosite (these are the most dangerous forms of asbestos)

or 0.2 fibers / ml of air averaged over a continuous period of 4 hours

or 0.6 fibers / ml of air averaged over a continuous period of 10 minutes

- For crocidolite or amosite asbestos without

or 0.5 fibers / ml of air averaged over a continuous period of 4 hours

or 1.5 fibers / ml of air averaged over a continuous period of 10 minutes

These figures are the highest level.

The system of work is necessary to channel the lowest possible level of exposure to asbestos to safeguard the lives of people involved. The Health and Safety Executive have suggested an environmental limit of 0.01 fibers / ml air for workers in public and non-asbestos. To ensure the levels mentioned above, the employer must carry out regular air monitoring before, during and after completion of all work involving asbestos products....